left_menu.gif
SurgeBuster
is a registered trademark of
Surge Control, LLP |
|
Specifications
|
|
Weight
2.1
lbs
Size
16 in. x 22 in
elongated elipsoid
Displacement
8 Gallons per thousand
For a 10,000 gallon tank, this equals 333 units.
A 1,000 gallon tank will use 33 units. |
|
|
|
|
|
SIMPLE
FIVE STEP ASSEMBLY |
|
|
PARTS
LIST:
(3) Paddles
(1) Disc
(2) Fastener Clips
(2) Fastener Bolts |
Image 1 |
|
Image 2 |
Insert the three
paddles through the slots in
the disc (See Image 1),
so that the longest
notch in the paddle is on the
same side as the bridge snap
latch, located at each disc
slot.
|
Image 3 |
Once
the three paddles are inserted, slip the short
notch in the paddle back over the disc, and
then SNAP the long notch up over the Bridge
Snap Latch. Repeat for remaining paddles. |
Image 4 |
Bend the paddles to join at either end and
insert the triangular side of one Fastener
Bolt through the triangular holes in the paddles,
from the outside. |
Image 5 |
Once
all three paddles on one end are fitted over
the top triangle, snap the Fastener Clip into
place on the inside, between the stacked paddles
and the triangular end of the Fastener Bolt. |
| Repeat
Step 4 for the opposite end, but stack the
paddles in the opposite order so that the
inside paddle on the first assembled end,
becomes the outside paddle on the second assembled
end. The middle paddle remains as the middle
paddle for both ends, and the outside paddle
on the first assembled end becomes the inside
paddle on the second assembled end. |
|
|
Your
assembly of the Surge Buster® Tie-Down
System is complete and ready for installation
through the manhole of your liquid tank. |
|
|
|
|
